Why Are Builders Opting For Precast Wall Panels

precast wall panels,mobile toilet suppliers ,c purlins

Prefabrication is the need of hour when it comes to construction world. The concept of pre engineered building some components of a building so that all you have to do at the actual construction site is assembly is amazing. One of the most important components of prefabrication is precast wall panels.

Precast wall panels are segments or sections of walls that are premade to specification such that they can be transported to the construction site. There these panels are positioned to form the required structure. Currently a lot of builder, cabin suppliers, mobile toilet suppliers are using precast walls to build structures.

Here are some advantages of these panels which will show why:

  1. Reduced Construction Time:

With the use of precast wall panels the actual on site construction time is reduced to a minimum. The panels are precast in a production facility. So the number of hours workers spend on the site positioning the panels, c purlins and other components to form the structure is far less than the time it would have taken to build it from scratch.

 

  1. Energy Efficient:

Mostly the materials used in precasting are more energy efficient. Moreover the thermal efficiency of the walls can be adjusted at the stage of precasting. Also because of the high thermal mass, the precast panels store and absorb temperatures more efficiently.

 

  1. Better For The Environment:

Since all the casting is done within the confines of a production facility the adverse effect of open air constructions are reduced. Precasting minimizes the construction pollution, space needed for construction and subsequent environmental disturbances. Use of precast panels, PUF panels and other ready to use components is hence extremely good for the environment.

 

  1. Minimal Use Of Raw Materials:

Once again since the casting is done within a production facility, the amount of cement and water used is optimum. Moreover, the labor resources used in precasting and then installation is also reduced.

 

  1. Reduced Wastage:

Efficient and/ or optimum utilization of materials always implies reduced waste. With use of precast panels there is minimal debris, site disturbance and minimal wastage of materials. So whether one is building a porta cabin office or any other structure, use of precast panel is the best way to go.

 

  1. Cost Effective:

With reduced waste, minimal use of raw material, reduced labor hours, use of precast panels is extremely cost effective. Builders and suppliers like roofing sheet suppliers, developers etc. will all vouch for the fact that precast panels have brought down the cost of construction.

 

This indicates how the use of precast wall panels and prefabrication has revolutionised construction. The numeorus benefits of the process is why builders are swinging towards use more and more of precast wall panels. And added reason why these panels are a perfect fit for construction is that they can be used in any kind of a project. Irrespective of whether the project at hand is as small as a security cabin or as huge as a multi-storey building, precast panels can get the job done with ease.

Prefabricated is becoming the new age choice, the modern preference for the simple reason of their convenience and cost.

Structural steel fabricator,Z Purlin, Rock wool suppliers ,

 

Low Cost Prefabricated Homes – The trending homes!

 

Prefabricated is becoming the new age choice, the modern preference for the simple reason of their convenience and cost.

 

Often referred to as Pre-fab Homes, these are modern houses which are built in components and modules. The parts are made off-site and usually assembled on the site in contrast to the traditional homes which are formed on site. These are generally lower in costs and convenient to build or instead assemble.

 

They are 10% to 20% cheaper than traditional houses and take lesser time for construction. Some of the materials which are used to build these houses are aluminum, fiberglass, steel, wood and concrete. These houses are made of good design high-performance manufacturing units which are moulded and shaped in a controlled environment.

 

How are prefabricated houses made?

 

Prefabricated houses are often made in two stages:

 

  1. Manufacture of parts at a factory

 

  1. Transportation of components and fixing them at the required locations.

 

Precast Concrete wall panels – The components which are used are precast lightweight concrete wall panels, these are lightweight and these units are casted and hardened before they are being used at the construction sites. Usually, the erection of structures happens easily and quickly if the above technique and process are followed.

 

PUF Panels – The PUF panels are another essential component of prefab homes; these provide perfect alignment of all panels such as ceiling floors, walls and corner panels. They can be customized to requirements in sizes and dimensions. There are many manufacturers of PUF panels around the country.

I Beams – I -Beams is another essential component in prefab homes; these are H shaped hot steel beams which are fitted to retain and pile structures one over the other.

Porta cabins – The office structures

These days, people also prefer pre-fab offices than the traditional ones, these offices are built similarly and can be reassembled in cases of a location change. These offices have porta cabins which can be customized for designs, specifications as per the requirements. Porta cabins are convenient to move and shift. Porta cabin designs are usually varied, and they can be made to look as professional as desired. Porta cabins are very common in China, Gulf, Arab, Africa, Latin American countries.

Prefab homes – the preferred ones

Prefab homes have many advantages:

  1. They offer a significant saving in cost, time and effort.
  2. They are convenient and can be assembled and reassembled easily.
  3. The biggest advantage is that the construction is not affected by weather conditions and external factors as the manufacturing of components is done in factories.
  4. Completely customizable

It has a few disadvantages as well:

  1. Extra caution and care are required to transit the components; it may cause breakage and mishandling.
  2. Transporting components can be really costly.
  3. Skilled labour is needed, and in India we lack expertise in this area.

However, while the demand for such homes is increasing with changing trends expertise and skilled manpower will be easily accessible in the times to come. The advantages outweigh the disadvantages.

Luxury Prefab Homes in India

We will be surprised to know that there are manufacturers of luxury prefab homes in India also. In cities like Mumbai and Bangalore, this is a familiar concept. They use the best of the designs, materials and can make them as luxurious as desired.